VITILAN T7 Pro Polnovzmeteno električno gorsko kolo 26'' Fat Tire Ebike, 52V 20AH odstranljiva baterija Polno vzmetenje

BAFANG 1000W Motor & 90N/M Torque: The VITILAN T7 PRO electric mountain bike has an 1000W high-speed brushless rear hub motor (Peak 1600W) and a 90N/M torque to offer strong power. Using our electric dirtbike for adults, you can challenging all terrains. The max speed of our ebikes can up to about 55km/h. 52V 20A SAMSUNG Battery: The VITILAN T7 PRO adult electric bike has an internally-enclosed 52V 20Ah Sam-sung removable lithium-Ion battery. You can deliver Max range 90km with pedal assistance per charge(5-6h). Full Suspension Mountain Ebike: The e bike for adults has a full suspension, which includes UDING Dual-crown suspension air shock front forks and DNM three-level adjustable air shock absorber, absorbs 80% of shocks, offer you a comfortable riding experience, you can expect better terrain handling, improved cornering capabilities and an smooth riding. TEKTRO Hydraulic Brakes & SHIMANO 8-Speed: The electric bicycle for adults uses tektro dual-piston hydraulic brakes with power-off function. The larger 180mm disc gives you powerful stopping power to stop your e-bike more effectively, even on soft terrain. In addition, with the Shimano 8-speed transmission, you can directly switch gears on different terrains to find a more suitable riding effect. 26”*4.0” CST Fat Tire: The 26 inch fat tire electric bike for adults is equipped with CST Brand puncture-resistant, wear-resistant and non-slip tires, it can fit various terrains, such as city road, snow road, gravel road and beach road. Smart Color Display: The smart color display provides speed, battery level, motor power, gear position, USB charging port and ride password protection, etc. When you ride outdoors, you can clearly see the contents on the meter even in the sun. Specification: Model name: T7 Pro Motor:1000W (Peak 1600W) Bafang Motor, 90Nm Battery:52V, 20Ah, 1040Wh Samsung Li-ion Battery Charger:58.8V/3.0A Charging: 4-6 Hours Pedal Assist:1-5 Level, Cadence Sensor Controller:52V / 30A Display:TFT color screen，With USB charging port Light:Bright Integrated LED Headlight(with Speaker) Horn:Electric Horn Frame Material:6061 Aluminum Alloy Brakes:TEKTRO 180mm Front & Rear Hydraulic Disc Brakes Suspension:Rear Suspension (DNM AO-8RC, with three-step lockout, air pressure adjustable) Nivel IPX: IPX6 ]Fork:UDING 105mm Air Dual Suspension Forks Throttle: Half-twist Throttle Derailleur:8-speed, 13-32T Cassete Shimano Derailleur Gear shifter:SHIMANO 8-Speed / 1-8 Levels Thumb Shifter Crank Set:Aluminum Alloy, 170MM Length, 53T Chaining Pedals Material:Aluminum Alloy Tire:CST 26'' x 4.0'' Fat Tires, Puncture-resistant Top Speed:45km/h Max Range:90KM Bike Dimension:195*116*70 CM Bike Weight:38KG Package Size:157*35*85CM Package Weight: 45KG Max Load:150kg Suggested Rider Height:165-200cm IPX Level:IPX6 EU Countries Can be delivered within 4-7 Days.You don't have to pay delivery fee. If you encounter any problems when you receive the product, please contact our professional after-sales customer service first. Italy After Sale Point: Weimiao ji Via Ramiro ortz 6/3 65126 pescara IT 3778179737 Before you go to the repair store ,please contact us first. Email: lijuping@gunai.store Whatsapp: +86 17841010701 Common bicycle problems and solutions Q: Error code appears on the meter A: Check the manual to see what kind of fault the error code belongs to, follow the instructions to handle it, and if it still doesn't work, provide error code pictures/videos. Q: Charger doesn't work A: First check whether the charger is green or red to green when charging; if the green light is always on, it may be a problem with the charger/charging port/battery, and if the red to green light indicates that the charger is normal, it may be a meter problem. Q: The meter can't be turned on A: Check whether the meter line/controller line is plugged in tightly, and re-plug it; if it doesn't work, it may be a problem with the meter/main line/controller Q: Pedal assist doesn't work A: Check whether the meter parameters are correct, confirm whether the throttle can work, and whether the sensor line is damaged or loose; if all are correct, replace the sensor Q: Rear wheel shakes A: Check whether the spokes are loose and whether they are installed in place; you can tighten the spokes and reinstall the rear wheel. Q: Motor does not work/has strong noise A: Check if the controller is loose, re-plug the motor cable of the rear wheel; provide a video of the noise for the technician to determine what the sound is. Q: Battery does not work/battery life is insufficient A: Measure the battery voltage after fully charging the battery (provide pictures). If the voltage is abnormal, there may be a problem with the battery/battery cover/circuit board. For battery life issues, customers test the battery life under full charge and provide the VOL when fully charged, the ODO (total mileage) when fully charged, the VOL when the battery is exhausted, and the ODO (total mileage) when the battery is exhausted. Q: Pedals cannot be installed A: Check if the left and right pedals are installed/twisted in reverse order. If so, check if the crank/pedal threads are slipped. If slipped, the crank pedals need to be replaced. Q: Brakes don’t work/are not sensitive/leak oil A: Adjust the brakes first/check if the brake pads are worn, if there is oil on the brake pads or discs, insufficient friction/is the brake line loose/leak oil, then you need to replace the brakes directly Q: There is an abnormal sound from the brakes A: It may be the sound of wiping the disc. Ask the customer to check if the disc is deformed. If it is not deformed, adjusting it can solve the problem. The disc is stuck in the middle of the brake (with a gap), not too close to the left or right side of the brake Q: The riser is loose and has a gap A: Check if the headset is aligned and installed, and adjust the headset; if it doesn’t work, replace a headset Common problems and solutions for scooters Q: The meter cannot be turned on A: First check if the line on the back of the meter is plugged in tightly, and re-plug it; if the meter still cannot be turned on after the operation, send a replacement to the customer Instrument/Check if the instrument fuse is burnt out/Check if the instrument or switch plug pin is broken Q: Motor does not work A: If it is a dual motor, swap the front and rear controllers to see if the non-working motor will work normally; Q: Abnormal noise from the motor A: Check if there is an error code on the screen, and provide a video for the technician to determine if the abnormal noise is normal Q: Headlight flickers or does not work A: Check if the line is loose, and re-plug the interface; the step-down board of the light strip may be burned/check if the light switch is available, if not, replace the switch Q: Steering/taillight does not work A: Re-plug the line, if it does not work, re-issue the accessories Q: Brake failure A: Check if the instrument has an error prompt, if so, the brake power-off switch may be faulty, and the power-off switch needs to be replaced; or check if the brake pads are worn out and the brake line is loose Q: Error code appears on the instrument A: Check the corresponding manual to see what kind of fault the error code belongs to, and operate according to the instructions. If it still does not work, provide error code pictures/videos. Q: The charger does not work A: First check whether the charger is green or red-to-green when charging; if the green light is always on, it may be a problem with the charger/charging port/battery, and if the red-to-green light is normal, it may be a problem with the instrument.