5/7 Inch IPS Type-C Secondary Screen Dynamic 1024600 LCD Display CPU GPU RAM Monitoring Support Vertical Freely AIDA64

Note: The USB screen needs to be installed with a driver to be used 5 inch Manual Driver download link: http://www.lcdwiki.com/5inch_PC_Sub_Display 7 inch Manual Driver download link: http://www.lcdwiki.com/7inch_PC_Sub_Display USB Single - Cable - Connection Display Only one USB cable is needed to be connected to the computer's USB port for data communication and transmission of the computer screenNo HDMI or other connection cables are required Note: The USB single - cable - connection function only supports Windows 10/Windows 11 systems and requires the installation of drivers Integrated Shell with CNC Precision Carving The shell is made of integrated aluminum through overall CNC machining, with a round and textured appearance, demonstrating meticulous craftsmanship Supports Brightness Adjustment The brightness is adjustableWhen powered off, it automatically retains the previous brightness setting, which is convenient for DIY Application DIY for Chassis Secondary Screen When combined ed with the AIDA64 software, it can be used as a USB secondary screen to display real-time running information such as CPU, memory, and hard drive status USB Computer Desktop Secondary Screen Just connect a USB cable to any USB port of a Windows 10/11 computerAfter installing the driver, it can be used as a secondary computer screen without occupying other HDMI/DVI/DP/VGA ports of the host Industrial Control Host Monitoring Screen Connect it to the USB port of an industrial control host with Windows 10/11 systemIt can be used as an industrial control host monitoring screen and for debugging parameters when going outIt features convenient connection, portability, simplicity, and high cost-effectiveness Name Parameter Display type IPS Resolution 1024 x 600 Brightness 500 Touch Type no touch Refresh Rate 25Hz Backlight Adjustment adjusted card pin required Power Supply Type-C5V Power 2.1W FAQ: What should you do if you encounter a flower - screen or black - screen problem? So solution: When the screen is black, first check whether the light is onIf the light is not on, replace the Type-C data cable or switch the USB interface on the computer, and then test Right-click on the desktop to check whether the display settings have detected the screenIf the screen is not detected, you need to replace the Type-C data cable or switch the USB interface on the computer, and then test Confirm whether it is copy mode in the display settingsIf it is copy mode, please change it to extended mode Oun the task managerIn its processes, close the MS USB Display process, and then restart the program Confirm whether the config.int file has been replaced